Sanyo Service Menu

You can use the Sanyo service menu, for such things as resetting the digital tuner, a total factory reset and enabling/disabling hotel mode. In this mode you must be careful as you can cause irreparable damage to your set.

As with most of our service menu access codes you will need a Sanyo Remote to be able to enter the service menu.

TV Method 1

  1. Unplug the power cable.
  2. Press and hold the {MUTE} button on the remote control while plugging the power cable back into the outlet.
  3. Keep pressing the {MUTE} button until the TV powers on with the Service Menu displayed.
  4. Use the {CH+} {CH-} buttons to select menus.
  5. Use the {VOL+} {VOL -} buttons to change settings.
  6. Some menus might have sub-addresses. Use the numeric buttons {0} to {7} to adjust sub-item data.
  7. Press the {MENU} button or turn the TV off to exit.

TV Method 2

  1. Unplug the power cable.
  2. Press and hold the {VOL -} button on the TV while plugging the power cable back into the outlet.
  3. Keep pressing the {VOL -} button until the TV powers on with the Service Menu displayed.
  4. Use the {CH+} {CH-} buttons to select menus.
  5. Use the {VOL+} {VOL -} buttons to change settings.
  6. Some menus might have sub-addresses. Use the numeric buttons {0} to {7} to adjust sub-item data.
  7. Press the {MENU} button or turn the TV off to exit.

Projector Method 1

Factory Menu Access

  1. Press and hold the {SELECT} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
  2. The Factory Menu will be displayed.

Service Menu Access

  1. Press and hold the {MENU} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
  2. The Service Menu will be displayed.
  3. Use the {UP} {DOWN} {LEFT} {RIGHT} buttons to move through menus and change values.
  4. To exit, turn the Projector Off.

Projector Method 2

  1. Press & hold the {MENU} button on the Projector for about 10 seconds.
  2. The Service Menu will be displayed.
  3. Use the {UP} {DOWN} {LEFT} {RIGHT} buttons to move through menus and change values.
  4. To exit, turn the Projector Off.