Generic Factory Reset Instructions for Panasonic TVs

Method 1

1. If the TV is off or in standby, switch on and set to view a TV channel.
2. Using the buttons on the front panel on the TV, press the Function [F] button
3. Using the buttons on the front panel on the TV, press and hold the Volume [-] button
4. At the same time as step [3], press and hold the info [/} button on the remote control

If this procedure has been accepted, the TV will show that it is performing a "Self- check". At the end of the "Self - Check", switch off the TV and unplug it from the mains for at least 20 seconds. When you plug the TV back into the mains and switch on it will perform a full "first time installation".

Method 2

1. If the TV is off or in standby, switch on and set to view a TV channel
2. Using the buttons on the front panel of the TV, press the Function [FCN] button
3. Using the buttons on the front panel of the TV, press the Volume [-] until a message appear on screen.